General requirements for files

When arranging (or preparing) the imposition of strips (or imposition of printing plates) is done by us:

• The layout is submitted without printer marks, trim lines, bleed lines (if any required, it should be provided as an additional layer), and scales.
• In the case when a publication uses a bleed, it should be accounted for in all the files that make up the layout.

Regarding the transmission of files in other formats – please make sure to call us in advance to confirm if it’s possible and how it can be done.

Layout general requirements

• Maximum paper size – SRA3 – 320 mm x 450 mm (board design).
• The size of the print field – 308 x 438 mm to print on one side.
• Maximum paper size – SRA3 – 320 mm x 450 mm (coated paper).
• The size of the printed pitch – 308 mm x 438 mm to print on one side
• Maximum paper size – SRA3 – 320 mm x 450 mm (glossy film).
• The size of the printed pitch – 308 mm x 438 mm.
• Color model CMYK. (Print Pantone and RGB can be discussed )
• Important layout elements (text, graphic design elements) must be moved away from the cutting line  not less than 3 mm.
• Allowance for edge 2 mm. For example, a standard business card size is 90×50 mm. that means, the image must have size 94×54 mm, important elements of the image should not exceed the size of 84x44mm
• Scale Layout 1: 1. make sure to specify edging format.
• If the layout sits on a spring that additional leaves from the springs 10 mm.

Requiring layouts for cutting in the plotter after printing

– The model must contain a file for printing and contour cutting of file (this can be two different layers in Adobe Illustrator or two pages in CorelDraw).

The requirements for certain products

FLAYERS

• – The color model – CMYK;
• – Recommended image resolution of 300 dpi;
• – Bilateral work, turn and face should be on separate pages or in separate files. The text should be converted to “curves”;
• – Black text must be 100% K. Allowance for edge 2 mm on each side. (Tolerance when cutting is 1 mm.);
• – DL- bleed 214h103 mm, the finished product 210h99 mm (6 pieces on a sheet);
• – A6 – bleed 109h152 mm, the finished product 105h148 mm (8 pieces on a sheet);
• – A5 – bleed 214h152 mm, the finished product 210h148 mm (4 pieces on a sheet).

POSTERS

• – The color model – CMYK;
• – Recommended image resolution of 300 dpi;
• – Bilateral work, turn and face should be on separate pages or in separate files. The text should be converted to “curves”;
• – Black text must be 100% K. Allowance for edge 2 mm on each side. (Tolerance when cutting is 1 mm.);
• – A4 – bleed 214h301 mm, the finished product 210h297mm (2 pieces per sheet)
• – A3 – bleed 301h424 mm 297h420mm finished product (1 pc per sheet).

BUSINESS CARDS

• – The color model – CMYK;
• – Recommended image resolution of 300 dpi;
• – Bilateral work, turn and face should be on separate pages or in separate files. The text should be converted to “curves”;
• – Black text must be 100% K. Allowance for edge 2 mm on each side. (Tolerance when cutting is 1 mm.);
• – Business bleed 94h54mm, finished product 90×50 mm. (24 pieces per sheet).

In case of discrepancy given to print files with the above requirements, they should be agreed with the manager.